Stainless Steel Cable Tie Balls
Production Introduction
We mainly produce stainless steel cable tie balls in sizes of 304 stainless steel balls, 316 stainless steel balls, the surface of the balls is rough enough to make the effect of the cable ties better。
|
Specification |
Bell Balls- AISI 304 /304L Stainless Steel Balls W 1.4301/W 1.4306, X5CrNi18-10/X2CrNi19-11 |
|
Composition |
· 304: C= max 0.15%, Cr=17 - 19%, Mn=max 2.0%, Si=max 1.00%, S= max0.03%, P=max 0.045%, Ni=8-10% · 304L: C=max 0.03%, Cr=18 - 20%, Mn=max 2.0%, Si=max 1.00%, S=max 0.03%, P=max 0.045%, Ni=8-12% |
|
Hardness |
HRC26 |
| Size | 1/8" 3.175mm |
| Weight | 0.133g/pc |
|
Corrosion Resistance |
Very high corrosion resistance, although not quite as good as 316. Chemical resistance is also reduced. |
|
Availability |
Good, Available in a fair range of sizes from 0.8-60mm. As with 316, can be produced in almost any required size. |
|
Applications |
Ball Bearings, Valves, Ball Screws where the low hardness is acceptable. |
|
General |
An Austenitic stainless steel, 304 provides a high degree of corrosion resistance. However, its low hardness can provide problems if loadings are high, and balls are easily damaged. |
PRODUCT DISPLAY
Our factory:
Size
We have the stainless steel ball for cable tie size: 2.381mm 2.5mm 2.8mm 3mm 3.5mm 4mm etc, any size can be customized.
Clibeanna Te: stainless steel cable tie balls, China, manufacturers, suppliers, factory, wholesale, cheap
B’fhéidir gur mhaith leat freisin
Glaoigh Linn